Jonathan's blog

Back in September 2009, I was given a 35mm SLR camera – a Canon AE-1 Program. I loved it, it was fantastic to use, and I wrote a blog post about the possibility of upgrading to a DSLR.

In March 2010, temptation got the better of me and I bought a Canon EOS 450D. My main concerns beforehand was the loss of the large LCD viewfinder of my Fuji S9600, and in particular, not being able to flip it out for awkward shots, and not being able to see useful information about the camera settings in the eyepiece.

Well I needn’t have worried – the 450D is of course more advanced than my AE-1 and has a small LCD under the optical viewfinder for that information. I hadn’t realised until I tried it out in the shop.

The issue of having to put my eye up to the camera still hasn’t been addressed, but it hasn’t been a problem. I just find myself lying on my belly more, or simply pressing the button and guessing about the composition.

In the two months that I’ve owned the 450D, I’ve taken over 2,000 photos^[1] and I’ve thoroughly enjoyed all of them. I feel more in control of the photos, and I can’t recommend an SLR strongly enough to anyone who is serious about photography.

I now have three EF mount lenses for this camera. Unfortunately they don’t fit the AE-1 (which uses the FD mount) but this very evening I bought a Canon EOS 300, which is a consumer-level 35mm SLR with an EF mount. You can pick up 35mm camera bodies on eBay for a fiver so I thought it might be nice to make even better use of my lenses.

If you’re actually interested in any of my camera facts and figures, you might like to look at my page of cameras. If you’re more interested in the pictures themselves, then why not browse my photo blog.

[1] That’s about 1.4 each hour I’ve owned the camera

The other day, I was suddenly taken by an urge to build a pinhole camera. I vaguely recall building one out of a shoebox at primary school that projected a dim image onto some tracing paper, but now that I have the equipment and a little experience in developing films at home, I thought it might be fun to make a pinhole camera that can work with film to make permanent images.

Medium-format sheet film is the ideal thing for such an application. While I have the stuff to develop 120 film, I don’t have any means of scanning it. So my system will be using regular 35mm film, which is more convenient for me.

This got me thinking about how to mount the film in the pinhole camera. Obviously when using small film, the camera needs to be shorter to project a smaller image. Could be fiddly to load individual frames of 35mm film into an oxo box! So I wondered about using the body of my Canon AE-1 Program, basically as a film holder.

But I wasn’t sure how easy it would be to cut a hole in the side of a cereal box and shove a camera in there without letting light in. So I considered building a pinhole camera around the body of my AE-1. Maybe I could jam a toilet roll tube into the FD mount, or something.

Then I found this much more sensible guide, Making a pinhole lens for an SLR. It describes how to make a body cap into a pinhole “lens”. It’s completely light-proof, easy to make, and causes no damage to the camera (assuming you have a second body cap).

So, I’ve ordered a body cap from eBay and I will be making it into a pinhole “lens”. I will, of course, scan and post the results on my photo blog. There will probably be some kind of review on this blog, too. Watch this space!